50,000 RPM brushless motor, using foot dental laboratory polishing kit QZ60 + W101E mobile dental microcomputer
රු 4,699.99 – රු 71,376.99
Description
2019 new strong QZ60+W101E Dental micromotor 50000 RPM handpiece for dental lab polishing micromotor
Packing List:
QZ60 Control Box +W101E andpiece
Pedal+Handpiece Holder
Please note that standard 50000rpm handpiece and controller are available for sell. And kindly remark 90000rpm to us if you need it and then we do customization for you.
We have three chuck optional:
2.35mm/3.0mm/3.175mm. Standard is 2.35mm. If you use is different,
please when you take order must remark.And we use plug, standard is EU plug.
If you need others please remark when you take an order.
Precautions:
1. When the handle is used, no water can enter and the bearing will rust. If it enters the water, it must
be dismantled on the same day to clean the water, dry it and use it again (to extend the bearing life).
2. When installing the grinding head, the flying dust on the grinding head rod must be wiped clean and
then placed inside the chuck (the service life of the chuck can be extended).
3. The use of the foot switch must be turned off the power of the host,otherwise it will affect the
performance of the host circuit (seriously can cause the motherboard to short circuit or burn).
4. When the handle is used, the handle should not be idling, and the grinding pin must be installed
(to avoid damage to the bearing and the spindle).
5. Do not touch, especially the handle.
6. Do not refuel the bearings
Purchase notice
About the receipt:
If you choose the logistics point from the mention: the logistics company local logistics point will call you,
please bring your ID card to the delivery point to pick up the goods.
If you choose the courier method, please check the following two items before signing.
1 Please confirm whether the outer packaging is damaged in the presence of the courier. If there is any damage,
please ask for the receipt after inspection.
2. Confirm that the quantity of the product is correct. If the quantity is incorrect,
please reject it and contact us in time.
About product information:
Different product batches, some information of the product may be different from the actual product,
please use the actual product information (the final interpretation right belongs to the company).
About the warranty:
1. controller box Warranty 1 year, If find defect, pls kindly send us vedio, we will send client some spare parts for free.
Payment terms:
1. TT
2. Western Union/Money Gram
3. Bank transfer
4. Wechat transfer/Alipay transfer(only for RMB).
FAQ
Q1: Are you manufacturer?
A1: Yes.we are factory, but not just a factory, as we have sales team, own designers, own showroom, can help buyers to decide which products are their best choice, and all your inquiry will be replied within 24 hours
Q2: Could you accept sample order?
A2ļ¼ Yes. we accept sample order for your evaluation
Q3: Could you do OEM Service?
A3: Some items accept this service, pls contact us for details
Q4: Which mode of transport would be better?
A4ļ¼In general, we advice to make delivery by sea for larger order, and for small order. Courier. By Air
Specification:
1. Name: Strong QZ60+W101E
2. Power: 180W
3. Rotate speed: 50000rpm
4. Plug: EU
5. Chuck: 2.35mm
6. Gross Weight: about 5kg
7. Input voltage: 220V/50Hz
8. Package: Bubble bag+foam+carton
Product advantage:
1. Rotary speed 0-50000 rpm. It will be less shake, internal air circulation, unique constructing
2.There are three valve spring and dust coat, can prolong the service life of the three valve spring and bearing
3. In order to start doing fine work stability, the front part of the thin used stainless steel structure.
4. Low noise, high speed, small vibration, high torque, high efficiency, stable performance, simple operation,long service life, especially in the fine grinding can reduce the failure rate of engraving.
5. Special design of the lock ring can replace various bit fast.
Packet Include:
1x Main Machine QZ60(EU Plug)
1xW101E Handpiece
1x Foot Pedal
1x Wrench
1x Carbon brush
Additional information
Origin | CN(Origin) |
---|---|
Model Number | strong drill QZ60+W101E |
Item type | dental drill & accessory |
Rotary speed | 0~50000rpm |
Item weight | 5kg |
Power | 180W |
Voltage | 110v-220V/50Hz-60Hz |
Pacakge | Carton box |
Feature | Cutter for manicure |
Application | dental polishing |
General Inquiries
There are no inquiries yet.
Reviews
There are no reviews yet.